Measuring & Other From Test equipment | Best Prices in Australia | GetPrice
Showing 1 - 20 of 393 results for

Measuring & Other From Test equipment

Sort:
  1. The True Megohmmeter Model 1015 is a compact, self-contained, battery-operated megohmmeter. This practical, dependable and rugged insulation tester can be used for a broad range of plant and field service applications and is designed for use in harsh environments. The Model 1015 permits insulation resistance testing at 500V and 1000V, and resistance measurements up to 1000Ω. The Model 1015 is an analog instruments with four easy-to-read scales. The megohm scale is an easy-to-read log scale graduated from 0.1 to 1000MΩ. The ohm scale is linear with a range from 0 to 10Ω. The Model 1015 comes complete with carrying case, shockproof rubber housing, a pair of color-coded leads, with black test probe, red alligator clip. spare fuse, batteries and a user manual. Features: True Megohmmeter Test voltage combinations 500V and 1000V Insulation measurements to 1000MΩ Push button for battery check Resistance range to 1000Ω 0 to 10Ω+ and 0 to 10Ω- continuity ranges Continuity measurements with 200mA test current Compact and lightweight Large, direct-reading, colored scale 600V test voltage range (safety check) Supplied with a yellow, non-slip, shockproof rubber housing and soft carrying case Designed to international and safety standards Applications: Acceptance testing and preventive maintenance Motors (AC and DC), transformers, cables Heaters, relays, circuit breakers Continuity checks Domestic and industrial contracting Rugged construction designed for mining, industrial, heavy-duty field, offshore and military applications
    FREE shipping
  2. The AEMCl AN-1 artificial neutral generates a momentary grounded artificial neutral to allow the measurement of fault currents on ungrounded three-phase systems. The Artificial Neutral is grounded intermittently through a relay driven by an internal electronic timer. This periodic grounding technique performs three functions – limits the possibility of insulation faults within the instrument, allows for better discrimination of actual fault current and limits instrument overheating. Relay closure time is switch selectable, Fast (0.5 seconds) or Slow (2.3 seconds), so that the ground fault clamp can be used on a meter with either an analog or digital display. An internal buzzer, also driven by the relay, is activated each time the neutral connection is grounded. Three LEDs, one for each phase, show the presence of each of the three phases prior to measurement. A fourth green LED indicates that the instrument is operating. Features: Designed for ungrounded networks — provides intermittent path to ground for leakage current measurements Works from 30 to 600VAC Red LED phase fault indicator Switch selectable ground fault cycling of 500mS or 2.3 seconds Buzzer alerts each momentary fault Battery operated Double insulated, fire retardant case Four color-coded 5 ft 1000V rated leads supplied with alligator clips Works with Model 2620 and other leakage current probes Applications: Troubleshoot faulty three-phase ungrounded devices Assist in leakage current measurements on ungrounded systems Create momentary ground conditions to detect fault currents
    FREE shipping
  3. The Fault Mapper®Model CA7024 is a hand-held, alphanumeric, TDR (Time Domain Reflectometer) Cable Length Meter and Fault Locator, designed to measure the length of electrical and communication cables. It can also indicate the distance to a fault in the cable (open or short), given access to only one end of a two or more conductor cable. By incorporating fast-edge step TDR technology, the Model CA7024 measures cable length and indicates the distance to open or short circuit faults. to a range of 6000 ft (2000m), on at least two conductors. The Model CA7024 indicates the cable length or fault distance and description, alphanumerically on a 128 x 64 graphical LCD. Features: Hand-held Cable Length Meter and Fault Locator Detect opens and shorts and the distance to them from one end of the cable Measure cable length up to 6000 ft (2000m) in feet or meters Automatic cable impedance compensation Built-in library of most common cables and their Vp (Velocity of Propagation) Manual selection of Vp for all cables not found in library Vp setting displayed long with length and cable type (if in library) Built-in tone generator for tracing and locating cables Large high-visibility blue electroluminescent backlit display CE Mark Applications: Determine length of cables on reels, coils or in boxes Determine cable runs in wall, conduit and other surfaces Detect opens and shorts in cables and the length to them Trace cables to identify runs and location
    FREE shipping
  4. The Digital Ground Resistance Tester Model 3640 performs ground resistance measurement. This direct reading tester measures from 10MΩ to 1999Ω, and is auto-ranging, so it automatically seeks out the optimum measurement range. The Model 3640 is easy to use - simply connect the leads, press to measure, and read. The large LCD (nearly 3/4" high) also indicates low battery status, overrange, and lead reversals. The Model 3640 comes with 3 color coded terminals to aid in easy hookup. Three LED indicators on the front panel continuously warn the user of measurement problems to ensure accurate and reliable tests. Leads are available as an option. The Model 3640 is fuse protected up to 250VAC. Features: Fall-of-Potential method Measures ground resistance (2- and 3-Point) Autoranging: automatically selects the optimum range Designed to reject high levels of noise and interference Extremely simple to operate: connect - press - read LED on faceplate informs operator of high input noise, high auxiliary rod resistance and fault connections Battery powered Rugged dustproof and rainproof field case Color-coded terminals May be used for continuity tests on bonding Applications: The Ground Resistance Tester Model 3640 is a rugged, easy-to-use instrument ideal for maintenance crews performing numerous tests. The Model 3640 is designed to reject high levels of interference. It can be used under difficult conditions such as high stray currents that normally affect accuracy. The Model 3640 may be used to perform the following tests: Three-point measurements for measuring resistance to ground of ground rods and grids. Three-point measurements are generally used when the electrode or grid is easily disconnected, if corrosion is suspected, or where ground faults are unlikely to occur. Two-point tests for continuity on bonding or on pre-established grounds. This test is commonly performed in urban environments where proper auxiliary electrode placement may be obscured by co
    FREE shipping
  5. The Lightmeter Model CA811 is a portable, easy-to-use instrument which features optical sensors that are designed to match the response of the human eye, making them ideal instruments for workspace analysis and planning. The ergonomically designed case, large display and intuitive function selection make this instrument the right choice for any application. The Lightmeter Model CA811 is designed for simple one-hand operation. It provides selectable lux or footcandle units for display and features a 3 1/2 digit backlit LCD and HOLD function. The Model CA811 offers a MAX function. Features: Easy one-hand operation Designed to measure a wide range of lighting types Removable sensor for remote reading Measures in footcandles (fc) or lux Cosine corrected HOLD function MAX function 2000-count backlit LCD CIE photoptic (human eye) response Lightweight and compact Removable protective sensor cover Includes rugged, shockproof, protective, dirt resistant holster Applications: Testing for OH&S compliance in workplace, cleanrooms, hospitals and industrial settings Ambient testing for light-sensitive displays and archives in museums and art galleries
    FREE shipping
  6. The Sound Level Meter Model CA832 is designed to assess sound ambiences or nuisances in accordance with international safety and quality standards. It complies with standard IEC 651. The Model CA832 is a portable, compact instrument with a 2000-count backlit LCD. It is designed for simple, one-hand operation and may be fitted on a tripod for long duration measurements. It features two weighting curves A and C for measurement integrating the sensitivity of the human ear according to sound frequency. Curve A is the general-purpose curve in an industrial environment, and C is more suited in presence of low frequency sounds. Also, mode "F" (fast response time) corresponds to the response time of the ear. Mode "S" (slow response time) will be used to obtain a uniform reading when the sound signal level shows fluctuations Features: Easy one-hand operation Measures sound according to the sensitivity of the human ear MAX function Three measurement range from 35 to 130dB Accuracy ±1.5dB Two time weighting curves: slow (550ms) and fast (55ms) Two frequency weighting curves: A and C Auxiliary output for recording Tripod mountable 2000-count backlit LCD Lightweight and compact Includes rugged, shockproof, protective, dirt resistant holster Applications: Factories Schools and libraries Airports Office environments Studios Auditoriums Hospitals
    FREE shipping
  7. The TRMS Clamp-On Leakage Current Meter Model 565 is designed to measure low AC currents, which are typically leakage currents in ground conductors. Low currents are measured using either 60mA or the 600mA range. The high sensitivity of the probe (10µA and 100µA) is possible through special jaw construction and, in particular, critical shielding of the jaws. At low measurement levels, this shielding out of the noise is critical for low sensitivity, accuracy and stability. The Model 565 may be used as a standard clamp-on meter measuring to 100Arms, as well as AC Volts and DC Volts, resistance and continuity (with a buzzer). The Model 565 is ergonomic in design and fits well in the hand, facilitating one hand operation. The jaw size is compact yet designed to accommodate the most common conductors up to 1" (26mm) in diameter. Features: Check for leakage and locate insulation breakdowns on live circuits. Measures leakage current up to 600mA with up to 10µA resolution. Measures current up to 100Arms Measures up to 600Vac/dc Measures Hz on either V or A inputs Measures Resistance and Continuity Hold feature freezes Value Max feature keeps track of highest measured In-rush value Zero button ideal for measuring relative values Filter to isolate 50/60Hz fundamental from harmonics Compatible with VDE 0404 Applications: Ground fault current measurement Electrical safety compliance testing Medical device safety testing Process loop monitoring General AC load monitoring Industrial troubleshooting checks
    FREE shipping
  8. This instrument is simple to use and offers numerous measurement possibilities with or without contact. Measurement by photo-reflection for no-contact measurement: a reflective strip is positioned on the part to be tested. The optical sensor helps to prevent external disturbances and the active, modulated infrared beam guarantees correct measurements. For traditional measurement with contact, an optional mechanical adapter (cylinder, cone or calibrated wheel) converts the rotation speed into pulses which are then measured by the tachometer. The CA1727 ensures up to 100,000 RPM using infrared measurement. A combination digital/analog bar graph LCD displays the measurement clearly and accurately. Other features include auto or manual range selection, smoothing, min/max recording and hold functions. Count, alarm and print functions are also provided. An accessory kit of three mechanical adapters for the AEMC CA-1727 allows for direct connection and measurement to rotating shafts and other devices. High and Low alarm levels are programmable as well as display multiplier coefficient "K" (scale factor). The CA1727 adds PC connectivity to the specification of the CA1725 and is supplied with TachoGraph software Features: Measurements up to 100,000 rpm Multiple of functions and automatic routines for data acquisition and storage: measurement of rotational speed, linear speed, count, frequency and period Extensive programming possibilities Digital display with analog bargraph USBinterface for analysing and processing results on a PC Includes TachoGrapg software on CD Applications: Laboratory and scientific measurements Motor rotational speed and RPM Conveyor systems Industrial applications Automotive applications Precision environments Should you require a mechanical accessory kit at an additional cost of $125, please advise at the time of placing your order.
    FREE shipping
  9. The AEMC model 5231 is a rugged, economical TRMS digital multimeter with a non-electrical contact testing (NCV) function for detecting live electrical circuits. This multimeter is designed for safety: IEC61010 600V CAT IV. The Multimeter Model 5231 provides a Volt, Ohm, Continuity, Diode function, as well as an AC voltmeter function with low input impedance that is capable of finding ghost voltages by adding a burden to the circuit. It performs AC/DC direct reading current measurements up to 600A with a current clamp accessory plugged in. The rotary function switch provides two OFF positions (OFF and OFF NCV). While in the OFF NCV position, the display will turn red if placed close to a live cable, providing a safe and easy way to detect hot wires. This meter has a high sensitivity with a resolution of 0.01mV and can withstand overloads up to 8000V. The Model 5231 is ideal for electrical installers, electricians and heating or air-conditioning specialists. Features: Non-electrical contact detection of network voltage (NCV Function) High sensitivity with a resolution of 0.01mV AC voltmeter with low input impedance (voltage measurements for electricity and electrical engineering) AC/DC voltmeter with high input impedance (voltage measurements for electronics) Ohmmeter, Continuity test with buzzer and Diode test functions Ammeter (measurement using current clamp-on current probes) Withstands overloads up to 8000V VLowZ function detects the presence of ghost voltage by placing a burden on the circuit Multi-position mounting for a hands-free work environment Recommended current probes - AEMC Models MN03, MN251 & SR651 IEC/EN 61010-1, 1000V CAT III, 600V CAT IV Applications: General purpose testing Detect loose electrical wiring Detect live circuits
    FREE shipping
  10. The Megohmmeter Model 1026 is a compact, lightweight, battery-operated , hand-held meter. It provides four functional tests. It is a megohmmeter, DC voltmeter, AC voltmeter, ohmmeter and a continuity tester. The Model 1026 tests at 250V, 500V and 1000V and measures insulation resistance from 1kΩ to 4000MΩ.The Model 1026 also features a continuity test range with audible beeper for resistances under 40Ω, and a 600VAC range for safety voltage check. In addition, the Model 1026 has an ohmmeter to measure from 0.1Ω to 4000Ω.The Model 1026 is supplied with test leads, clips, batteries, soft carrying case and a user manual. Features: Test voltage combinations of 250V, 500V and 1000V Insulation measurements to 4000MΩ Resistance measurement to 4000Ω Continuity test Continuity beeper 600VAC/DC test voltage range Large, easy-to-read display Data hold switch Test button may be locked-on for three minutes for hands-free operation Automatic discharge when test button is released Low battery indication Supplied with a soft carrying case and test leads Applications: Test insulation on cables, transformers, motors, insulators and wiring installations High resistance or absorption tests Spot reading tests Timed resistance measurements Dielectric (DAR) and polarization (PI) tests Low insulation test range for testing old or flooded installations Motor insulation resistance measurements Continuity checks and low resistance measurements Computer controlled production line testing Predictive maintenance by storing results in PC for trend analysis
    FREE shipping
  11. The Clamp-On Meter Model 511 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 511 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 511 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Model 511 is sized for a comfortable, one-handed operation. This model is average sensing and designed for traditional average responding electrical systems. The jaw opening for the Model 511 is 1.575" (40mm). Features: Standard size, full function clamp-on meter 1000AAC current measurements 750VAC/1000VDC volt measurements Resistance measurement to 4000Ω Continuity with beeper below 40Ω Frequency measurements from V and A Diode test 1ms Peak function for fast capture of signals Hold function to "freeze" readings Push-button for easy ADC zeroing Large easy-to-read 4000-count display 42-segment analog bargraph Includes test leads and soft carrying pouch Applications: Commercial, industrial, residential and HVAC troubleshooting Power panel, junction box and battery bank monitoring AC or DC motor testing Power plant troubleshooting Electrical testing and troubleshooting on traditional loads
    FREE shipping
  12. The AEMC model 6610 Phase Rotation Meter offers the user a non-contact method of determining phase sequence and rotation on Australian electrical networks. Being non contact means that the AEMC 6610 has no exposure to live metal components when testing phase sequence and rotationand can safely identify phase rotation on 3-phase systems and identify live and open/de-energized phases. The phase order is displayed as soon as the leads are connected. The presence of live wires and phase sequence are provided by LED indication and buzzer as soon as detection has occurred. The AEMC 6610 is ideal for installing rotating machinery or motors, and for checking generator phase rotation direction. Features: No direct electrical contact (no metal contact points) Operating voltage: 75 to 1000VAC Frequency range: 45 to 65Hz Phase rotation LED indicators (ABC or BAC) Bright LED indication Live or Open Phase (A, B, C) Includes three attached color-coded test leads with non-metallic alligator sensor clips for easy connection to the device under test Low battery indicator Back cover includes a magnet feature that can mount the instrument onto any metal cabinet panel for easy measurement EN61010-1; 1000V CAT III; 600V CAT IV Applications: Verify incorrect phase wiring Detect open or de-energized phases Determine correct wiring for proper rotation on motors, pumps, etc.
    FREE shipping
  13. The Testo 320 is a rugged flue gas analyzer offering comprehensive combustion system analysis. With a high resolution colour display and a fast 30 second start up, the Testo 320 provides the ability to measure Carbon Monoxide (CO) and Carbon Dioxide (CO2) levels accurately and efficiently. Designed for industry, the Testo 320 combustion analyzer allows for basic testing on all types of boilers, heaters or furnaces, as well as allowing the set up and commissioning of more complex multi-stage or modulating heating systems. This can be achieved via the 320's flue gas matrix feature, which graphically displays the combustion characteristics and efficiency of the system. Comprehensive combustion efficiency analysis: O2, CO (with built-in NOx filter) CO2 Combustion calculations Draft Pressure Flue gas matrix User-changeable, pre-calibrated sensors that are easy to replace The Testo 320 combustion analyzer is supplied with a rechargeable battery, a 12 inch probe with cone and hose, an AC power supply (with USB recharging), spare particulate filters(10), and rugged case.
    FREE shipping
  14. The new FLIR CM78 1000A Combination Clamp Meter offers the high levels of the safety and performance that professionals demand. As both a True RMS Digital Multimeter (DMM) as well as a Clamp Meter, the CM78 has the versatility and ruggedness to be your primary tool for electrical diagnostics. Quickly and safely make accurate AC and DC measurements up to 1000A or 1000V. The FLIR CM78 even incorporates an infrared thermometer and a Type-K thermocouple connection to scan for hot spots or ensure that temperatures are within specs. The clamp meterhas a thick, rubberized, military grade housing with no hard plastic in sight. From the tough jaws to the test leads, it's understandable why FLIR can offer a limited Lifetime Warranty. Taking your safety as seriously as you do, rated to CAT IV-600V, and CAT III-1000V, the CM78 even includessilicon test leads. Powerful dual LED work lights make your work area bright and safe. Helping you get the most out of your analysis is the flexible connectivity options of the FLIR CM78. Pair it with a FLIR Thermal Camera with MeterLink to store all your electrical readings right alongside the thermal image of the trouble spot. Or use Bluetooth to to connect to your smartphone or tablet to monitor the CM78 from a distance, or see reading trends over time on a graph. The FLIR CM78 Clamp Meter gives you the flexibility and safety to make the critical decisions. Key Features: IR Thermometer provides fast non-contact measurements on panels, conduits, and motors Dual LED work lights Bluetooth connection to the FLIR Tools Mobile app METERLiNK enabled to send electrical data wirelessly to FLIR Thermal Cameras Voltage and Current Min, Max, Average Auto Power Off Data Hold, Relative, Peak Hold Battery Status Indicator Bright White LED Backlight
    FREE shipping
  15. The Kyoritsu KEWMATE2001 is an AC/DC multimeter, with the ability to measure both voltage and current. Featuring a 100A open clamp sensor, the KEWMATE2001 is designed for portability and durability. The Kyoritsu KEWMATE2001 can measure AC and DC voltage up to 600V, as well as resistance up to 34MΩ. Currents, both AC and DC, can also be measured up to 100A, using the supplied clamp sensor. Measured values can be held using the data-hold function. The KEWMATE2001model has a 3400 count bargraph display and features an auto-power save function, as well as acontinuity buzzer, which provides an audible warning below 30Ω.The meter includes an AC/DC clamp sensor, batteries and instruction manual. Features: Measures AC and DC current up to 100A (using the 10mm open clamp sensor). AC and DC voltage up to 600V. Resistance up to34MΩ. 3400 count bargraph display. Data-hold function. Continuity buzzer. Auto-power save. Pocket size, robust design. Specifications:
    FREE shipping
  16. The Fault Mapper Pro® is a hand-held graphical TDR (Time Domain Reflectometer) designed for identifying and locating faults on power and communication cables, given access to one end only. The Fault Mapper Pro® measures cable length and indicates the length and distance to cable faults to a range of 9 ft (3 m) to 19,000 ft (6000m) on virtually any type of cable. It injects a series of pulses into the cable under test. The velocity at which the pulses travel is determined by the type of cable, which is known as the velocity of propagation (Vp) of the cable. The Velocity of Propagation (Vp) is adjustable between 1% and 99% enabling accurate calibration to the cable under test. The Vp value is expressed as a percentage of the speed of light (e.g. 67% or ft/mtrs/micro-second), this value will vary according to the type of cable under test. The Fault Mapper Pro® can accept user selectable values between 1 and 99% (or the equivalent value in feet or meters per micro-second). Based on the selected Vp and the time taken for the pulses to travel through the cable, a reflection profile of the cable under test is displayed. An adjustable cursor assists in locating faults and termination. The Fault Mapper Pro® incorporates an oscillating tone tracer, which is detectable with a standard tone tracer, for use in the tracing and identification of cable pairs. Features: 11 range scales indicating cable faults and terminations up to 19,000 ft (6000m) in feet or meters Detects opens, shorts, taps, faulty taps, bridge taps, splitters, high resistance, wet cables, splices and more Identifies impedance mismatches Works with twisted pair, parallel and coaxial cable Selectable cable impedance (25O, 50O, 75O, 100O) Over-voltage protection up to 250V Adjustable cursor assists in locating faults and termination Built-in tone generator for tracing and locating cables Large high-visibility blue electroluminescent backlit display Applications: Determine length of cable runs Find
    FREE shipping
  17. Measuring from 0-13kPa and offering multiple measurement units,the2021P7 digital microprocessor manometer from Digitron,offers many innovative functions designed to make the users job easier, saving both time and money. Select engineering units allow the user to take and record readings in their desired unit of measure. Overrange protection and IP67 waterproofing (1m depth for 30 minutes) make this meter suitable for a wide range of applications, such as hydronic balancing. The 2021P7 is easy to operate, reliable and built to last, and would find uses either in laboratory or industrial use. Other features include autoranging for high accuracy readings, displayed on a backlit LCD display, making it easy to read in hard to see places, zeroing for field calibration, data hold, smoothing for stable readings in fluctuating situations, range lock and Max/Min readings.An optional pressure transducer is available for readings up to 500bar. Features: 0-130mbar pressure range Positive and negative readings Overrange protection Backlit LCD display Range Lock Max/Min Autoranging Professional Quality 2 Year Warranty IP67 Waterproof European engineered and built
    FREE shipping
  18. The Metrix MTX 3291 is an industrial quality professional TRMS multimeter with dual digital display allowing measurement of a wide range of electrical parameters. It's innovative design makes it compact, rugged, comfortable to grip and leakproof to IP67 standard. With an easy to use design based upon the "one key, one function" principle, monitoring of Min, Max, Avg and Peaks enables you to capture various faults and transients very easily. With an easy to read 70 x 52mm LCD screen, all pertinent information relating to the measurement being taken is displayed in a logical manner, and as well as the electrical measurements being taken by the multimeter, a contextual connection diagram guides the user to connect the leads correctly for the type of measurement being taken. The MTX 3291 allows for dual measurements to be displayed at the same time on a 60,000-pts display, with a main display at the top and a secondary display beneath, separated by a 61 segment bar graph for analogue style readings. With this dual LCD it is possible to display voltage and frequency at the same time, or a real time measurement along with the MAX, MIN or AVG values, or even a PEAK value, or RELATIVE value. The MTX 3291 also boasts a low pass filter, making RMS measurements possible on speed controllers for motors. The MTX 3291 has a low impdance voltage measurement function, which allows for measurement of electrical circuits where ghost voltages may be present. Building on the specification of the MTX 3290 multimeter, the MTX 3291 has an improved 60,000-cts display plus a USB optical interface, allowing the multimeter to interface with a PC with the help of the included SX-DMM software. Additionally, the MTX 3291 has a higher overvoltage safety rating of CAT IV - 600V / CATIII - 1000V. Features: TRMS, 60,000-cts, VAC/DC/AC+DC, VLowZ, IAC/DC/AC+DC, Ohm, Cap, Diode, Hz, Temp 60,000 count display True RMS AC Voltage and Current measurements 1000V AC/DC/AC+DC 10A AC/DC/AC+DC VlowZ - low impe
    FREE shipping
  19. The Fieldpiece Dual-Temperature Meter, model ST4, measures two temperatures simultaneously using the included K-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features two front face calibration pots and comes in a clear front case with magnetic hanger model ANC6. Use with the optional ATWB1 wet bulb thermocouple to help you find target superheat or with our pipe clamps to check for blocked filter/driers, compressor discharge temperature, oil temperature or subcooling. How Does it Work? Plug in one or two of the supplied K-type thermocouples and find T1, T2, or T1-T2. The ST4 has been designed to be used while inside the carrying case. Use the magnet to hang it. The front is clear so you can press the buttons and read the display. The zippers allow the thermocouples to exit from the top of the case. Operation Turn on the ST4. Select ºC or ºF. Plug in one or both of the k-type thermocouples to the top of the ST4. The red LED will light up when a necessary thermocouple isn’t engaged. Press “T1” for the left thermocouple. Press “T2” for the right thermocouple. Press “T1-T2” to get the real-time difference between the two thermocouple readings. Select temperature resolution by pressing the “1º/0.1º” button. “HOLD” keeps current reading on screen until “HOLD” is pressed again. Press once to record MIN and MAX. Press once to toggle between MIN and MAX. Hold down for 1 second to exit the MIN/MAX function. Operate the ST4 in it’s case to take advantage of the hanger. You can operate the ST4 while still in the carrying case because of the clear front window. Note: When in HOLD or MIN/MAX,
    FREE shipping
  20. The C2 from FLIR is a ground breaking thermal imaging camera, which is compact enough to fit into a shirt pocket, but retains the fuller features of an entry levelthermal imaging camera. With a smaller size, which is similarto that of a smartphone, the C2 is a full featured thermal imaging camera, designed for contractors and inspectors. With a capacitive touchscreen, and a simple to use menu interface, the FLIR C2 can capture and store both infrared and visual images and works with FLIR Tools software, enabling the thermographer to download and analyse the images, before generating a report which can be customised and sent to the client. The C2 also has FLIR's proprietary MSX image enhancement technology built in which takes the detail from the visual image and blends the edge contours in to the infrared image, enhancing the overall image quality, and bringing out details not usually seen in infrared images. With a 3" colour LCD touchscreen display, the FLIR C2 features automatic orientation, which allows the image to be the "right way up" depending on whether the device is held in landscape or portrait orientation. Around 500 image sets can be stored in the FLIR C2 memory, and then later downloaded to a Windows or Mac computer running the FLIR Tools software through the supplied USB cable. Features: 80 x 60 Infrared Resolution (4,800 pixels) Thermal Sensitivity of 100mK (0.1°C) Wide Angle 41° x 31° field of view MSX technology for enhanced thermal images Capacitive 3" touch screen with 320 x 240 resolution Multiple Colour Pallettes (Iron, Rainbow, Rainbow HC, Grey) Built in Digital Camera with 640 x 480 resolution Object temperature range of -10°C to +150°C Battery run time of 2 hours, with 1.5 hours recharge time 9Hz image frequency Accuracy of +/- 2°C or 2% (whichever is greater at 25°C) Adjustable Emissivity Size - 125 x 80 x 24mm The FLIR C2 is supplied complete with built in battery, lanyard, power charger w
    FREE shipping
Back to top

Recently Viewed Measuring & Other


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.