Materials Handling Equipment - Page 2 | Best Prices in Australia | GetPrice
Showing 21 - 40 of 93 results for

Materials Handling Equipment

Sort:
  1. The Challenger Brake Winches are manufactured of high quality material and comply to the Australian Standard AS1418.2 when correctly fitted with approved wire rope and fittings. They can be used for both lifting and pulling purposes and are a compact, lightweight and a cost-effective solution for a variety of applications. Featuring a high quality powder coated finish, these winches represent the best value for money in the market.Product Features All Challenger models are manufactured to comply with AS1418.2 when correctly fitted with approved wire rope and fittings.Positive Weston-style brake will hold the load in any position.Compact, lightweight and rugged construction.Mechanical components enclosed for protection and safety through one-piece designed frameBaked enamel and plated finish.Heat-treated gears.Strong removable handles.High precision construction minimises gear noise.For every model sold, a donation will be made to the McGrath Foundation in Australia and the Child Cancer Foundation in New Zealand.SpecificationsPulling Capacity: 370kg Lifting Capacity: 180kg Hand Force Required: 14.5kg Finish: Powder CoatedGear Ratio: 4.1:1Handle Length: 155mm Hub Diameter: 40mm Cable Diameter: 4mm x36m Net Weight: 3kg
    + Shipping
  2. The Challenger Brake Winches are manufactured of high quality material and comply to the Australian Standard AS1418.2 when correctly fitted with approved wire rope and fittings. They can be used for both lifting and pulling purposes and are a compact, lightweight and a cost-effective solution for a variety of applications. Featuring a high quality powder coated finish, these winches represent the best value for money in the market.Product Features All Challenger models are manufactured to comply with AS1418.2 when correctly fitted with approved wire rope and fittings.Positive Weston-style brake will hold the load in any position.Compact, lightweight and rugged construction.Mechanical components enclosed for protection and safety through one-piece designed frameBaked enamel and plated finish.Heat-treated gears.Strong removable handles.High precision construction minimises gear noise.For every model sold, a donation will be made to the McGrath Foundation in Australia and the Child Cancer Foundation in New Zealand.SpecificationsPulling Capacity: 1200kg Lifting Capacity: 600kg Hand Force Required: 19kg Finish: Powder CoatedGear Ratio: 10:1Handle Length: 319mm Hub Diameter: 75mm Cable Diameter: 8mm x 16m Net Weight: 10.3kg
    + Shipping
  3. The Challenger Drum Lifter is a safe solution for lifting and shifting 250kg drums. A light-weight design, swivel steering and an easily manoeuvrable handle allow for easy positioning. The Challenger Drum Lifter is a great solution to help eliminate injuries from the manual handling of drums. Product Features Rated capacity of 250kgPerfectly suited for lifting standard international size drums E.g. 200L / 44 GallonLight-weight design and easily manoeuvrableLocking mechanism grips to the top of the drum and secures safelyEasy movement and positioning with push-or-pull motion handle and swivel steeringHydraulic pump handle to easily lower or lift drumSpecifications Drum Length: 915mmDrum Diameter: 572mmNet Weight: 40kgLighting Height: 280mmRated Capacity: 250kg
    + Shipping
  4. The Challenger Brake Winches are manufactured of high quality material and comply to the Australian Standard AS1418.2 when correctly fitted with approved wire rope and fittings. They can be used for both lifting and pulling purposes and are a compact, lightweight and a cost-effective solution for a variety of applications. Featuring a high quality powder coated finish, these winches represent the best value for money in the market.Product Features All Challenger models are manufactured to comply with AS1418.2 when correctly fitted with approved wire rope and fittings.Positive Weston-style brake will hold the load in any position.Compact, lightweight and rugged construction.Mechanical components enclosed for protection and safety through one-piece designed frameBaked enamel and plated finish.Heat-treated gears.Strong removable handles.High precision construction minimises gear noise.For every model sold, a donation will be made to the McGrath Foundation in Australia and the Child Cancer Foundation in New Zealand.SpecificationsPulling Capacity: 545kg Lifting Capacity: 270kg Hand Force Required: 15kg Finish: Powder CoatedGear Ratio: 4.1:1Handle Length: 208mm Hub Diameter: 48mm Cable Diameter: 5mm x 23m Net Weight: 3.3kg
    + Shipping
  5. The Safepour is a safe, easy and cost effective tool to decanter liquids. No more need to struggle with heavy drums of liquid and risk injuries with the Safepour range which consists of two different options. SP Multilifter Product FeaturesThe SP Multilifter can be used to load up to 500kg metal drums for a variety of lifting applications. It is designed to eliminate the need for two separate lifting devices and can be used to lift drums with and without lids. It also features a positive lock action which grips the rim of the drum for hands-free safety.SpecificationsRated Capacity: 500kgNet Weight: 4kg
    + Shipping
  6. The DrumGrab is a unique Australian designed device which offers a safe, easy and reliable way to shift, lift and manoeuvre most 205 litre drums. It is self-centering, fast and easy to lock on and will only come off when required! It fits to most lifting devices and has a rated capacity of 1 Tonne. DrumGrab is an efficient method of drum handling which prevents injuries and spills and will make the job easy! Product Features: Complies with the Australian standard AS4991.Fits to almost all plastic and steel 205 litre drums with lids fitted, which have a rim.Capable of extracting a drum from the middle of a cluster without affecting the other drums.Cast, using high quality ductile iron; conformed to Australian standards (S.G. Iron 500/7 to AS1831) which is powder coated in safety yellow.Holds up to 1 tonne easily.Prevents injuries and spills.Robust and reliable for harsh conditions. SpecificationsRated Capacity: 1000kgMaterial: G. Iron 500/7 Powder coated finishDrum Size: 205 litre / 44 gallonsNet Weight: 7kg
    + Shipping
  7. Hitachis reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed while being tested to the Australian standards.Features Manufactured to comply with AS1418.2.Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control.Optional IP65 pendant including E-Stop available.Safety Limits: full current and shunt limit switches operate in both directions of hook travel.Overload Limiter: this electro-mechanical device is exclusive to the Hitachi range and boasts a far more superior overload protection device than the slipping clutch method. Available on all Hitachi models.Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the F models have an additional auxiliary centrifugal brake fitted to the motor.Chain Bucket: noiseless design with flexible mounting.High quality Grade 80 zinc or nickel plated load chain supplied as standard.IP54 protection rating on all electric hoists and trolleys.Motor thermal protection on all Hitachi models.Optional radio remote control.Ambient temperature requirement of -10 to 40 degrees.Class M4 inclusive of 180 starts per hour.Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and electrical system can be operated under severe conditions.Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.Special low headroom hoist and trolley arrangements available to suit tight headroom applications.Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure
    + Shipping
  8. Features: Hitachi Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure suitability for curved beam applications.Specifications: Three Phase Electric Trolley415V, 50HzRated Capacity: 1000kgET Speed: Single Speed - 10.5m/min Motor: 0.14kWWeight: 38kgMin Radius: 1.5mGirder Width: 75-125mm Actual product may vary slightly from image shown. We have made every effort to display as accurately as possible the colours and images of our products that appear at the store. We cannot guarantee that your computer monitor's display of any colour will be accurate.
    + Shipping
  9. Hitachis reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed while being tested to the Australian standards.Features Manufactured to comply with AS1418.2.Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control.Optional IP65 pendant including E-Stop available.Safety Limits: full current and shunt limit switches operate in both directions of hook travel.Overload Limiter: this electro-mechanical device is exclusive to the Hitachi range and boasts a far more superior overload protection device than the slipping clutch method. Available on all Hitachi models.Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the F models have an additional auxiliary centrifugal brake fitted to the motor.Chain Bucket: noiseless design with flexible mounting.High quality Grade 80 zinc or nickel plated load chain supplied as standard.IP54 protection rating on all electric hoists and trolleys.Motor thermal protection on all Hitachi models.Optional radio remote control.Ambient temperature requirement of -10 to 40 degrees.Class M4 inclusive of 180 starts per hour.Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and electrical system can be operated under severe conditions.Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.Special low headroom hoist and trolley arrangements available to suit tight headroom applications.Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure
    + Shipping
  10. Hitachis reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed while being tested to the Australian standards.Features Manufactured to comply with AS1418.2.Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control.Optional IP65 pendant including E-Stop available.Safety Limits: full current and shunt limit switches operate in both directions of hook travel.Overload Limiter: this electro-mechanical device is exclusive to the Hitachi range and boasts a far more superior overload protection device than the slipping clutch method. Available on all Hitachi models.Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the F models have an additional auxiliary centrifugal brake fitted to the motor.Chain Bucket: noiseless design with flexible mounting.High quality Grade 80 zinc or nickel plated load chain supplied as standard.IP54 protection rating on all electric hoists and trolleys.Motor thermal protection on all Hitachi models.Optional radio remote control.Ambient temperature requirement of -10 to 40 degrees.Class M4 inclusive of 180 starts per hour.Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and electrical system can be operated under severe conditions.Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.Special low headroom hoist and trolley arrangements available to suit tight headroom applications.Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure
    + Shipping
Back to top

Recently Viewed Materials Handling Equipment


Connect
Getprice compares prices across all of your favourite products Australia-wide, covering all major cities including Sydney, Melbourne, Perth, Canberra and Brisbane.
Getprice compares prices across Sydney, Melbourne, Perth, Canberra and Brisbane.