Crown Models & Collectables price

A great economical option for simple marking work. It has a single steel pin for marking along the grain and the faces are reinforced with brass strips to minimize wear and movements of the timber over time. Maximum capacity is 145mm from the edge of work piece with the head measuring 66 × 56mm.…

A great little marking gauge that would suit smaller hands and smaller, finer detail work. Produced solely from rosewood and brass, the main bar measures approximate 12mm square and 165mm long. The 2.5mm heavy steel pin can be positioned up to the 120mm from the 45 × 43 ×19mm fence. It is lacquered…

A great little marking gauge that would suit smaller hands and smaller, finer detail work. Produced solely from rosewood and brass, the main bar measures approximate 12mm square and 165mm long. The 2.5mm heavy steel pin can be positioned up to the 120mm from the 45 × 43 ×19mm fence. It is lacquered…

An well-priced and well-made sliding bevel, the handle stock is lacquered beech with a 28 × 19mm cross-sectional dimension, approximately 145mm long. The 1.0mm-thick blued tool steel blade is 230mm long and secured in place with a solid brass bolt and wing nut. The 3mm-thick brass plate caps…

Small in size but definitely not a toy, this exquisite little sliding bevel has a 0.8mm thick 100mm long blued tool steel blade, with a 75mm-long rosewood and brass handle. The solid brass wing nut secures the blade in place. Great for smaller work but made to last a lifetime, each bevel is…

Small in size but definitely not a toy, this exquisite little sliding bevel has a 0.8mm thick 100mm long blued tool steel blade, with a 75mm-long rosewood and brass handle. The solid brass wing nut secures the blade in place. Great for smaller work but made to last a lifetime, each bevel is…

When working on a small square, smaller tools that you can still rely on for accuracy are a must. This great little square fits the bill perfectly and with the Crown logo stamped on there, you know its going to be a great tool to use for many years to come. The handle is produced from imported…

When working on a small square, smaller tools that you can still rely on for accuracy are a must. This great little square fits the bill perfectly and with the Crown logo stamped on there, you know its going to be a great tool to use for many years to come. The handle is produced from imported…

A great little mortice gauge that would suit smaller hands and smaller, finer detail work. Produced solely from rosewood and brass, the main bar measures approximate 12mm square and 165mm long. The two pins used for marking mortices (or two parallel lines) can be positioned a minimum of 4.5 – up to…

A great little mortice gauge that would suit smaller hands and smaller, finer detail work. Produced solely from rosewood and brass, the main bar measures approximate 12mm square and 165mm long. The two pins used for marking mortices (or two parallel lines) can be positioned a minimum of 4.5 – up to…

A solid mortice gauge to last a lifetime. It is produced from rosewood with a solid 18.5mm main bar measuring 203mm long. The mortice pins can be positioned 6.0 – 140mm apart via the second adjustable pin that runs on a 4.75 × 5.50mm t-profile brass strip or 135mm when using the single marking…

A solid mortice gauge to last a lifetime. It is produced from rosewood with a solid 18.5mm main bar measuring 203mm long. The mortice pins can be positioned 6.0 – 140mm apart via the second adjustable pin that runs on a 4.75 × 5.50mm t-profile brass strip or 135mm when using the single marking…